reference tone การใช้

• Alternatively, each string can be tuned to its own reference tone.
• This computation is done for both the higher and the lower reference tone.
• For this purpose Vogel introduces virtual reference tones that are not necessarily part of the chord.
• For each frequency and intensity, the listener also listened to a reference tone at 1000 Hz.
• These reference tones are chosen such that all chord tones have integer relations to these reference tones.
• These reference tones are chosen such that all chord tones have integer relations to these reference tones.
• Fletcher and Munson adjusted the reference tone until the listener perceived that it was the same loudness as the test tone.
• The other improvement, which would prove key to the design, was to use the incoming signal itself as the reference tone.
• These improvements meant the modem was able to follow changes in the reference tone no matter what the source of that drifting was, local or remote.
• While the high and low tones are unremarkable, the two mid tones are only differentiated by differences in their behavior when referencing tone rules, and not by their pitch.
• Interval recognition is used to identify chords, and can be applied to accurately tune an instrument with respect to a given reference tone, even if the tone is not in concert pitch.
• For each chord there exists a lower and an upper reference tone, with all chord tones being integer multiples of the frequency of the lower reference tone and integer fractions of the frequency of the upper reference tone.
• For each chord there exists a lower and an upper reference tone, with all chord tones being integer multiples of the frequency of the lower reference tone and integer fractions of the frequency of the upper reference tone.
• For each chord there exists a lower and an upper reference tone, with all chord tones being integer multiples of the frequency of the lower reference tone and integer fractions of the frequency of the upper reference tone.
• In quadruple notation there are only positive ( or zero ) values if the chord is related to the lower reference tone, and only negative ( or zero ) values if the chord is related to the higher reference tone.
• In quadruple notation there are only positive ( or zero ) values if the chord is related to the lower reference tone, and only negative ( or zero ) values if the chord is related to the higher reference tone.
• Piano tuners listen for beats between a note made by the piano and a reference tone; as the two pitches approach each other the frequency of the beats approaches zero, so it takes arbitrarily long to tune a piano arbitrarily well.
• The output of this first stage is called a spectral pitch pattern, when it is determined by psychoacoustic experiments in which listeners make subjective judgments, matching the perceived pitch of a pure reference tone to that of a successively presented complex tone.
• :: : : : The " high [-] pitched noise " referred to by the OP is a generally a standard audio reference tone, 1 kHz in frequency and transmitted at a standard amplitude of 0 Thomprod 19 : 34, 7 November 2007 ( UTC)
• In practically every other biopic article that has been referenced as example / precedent, this section falls somewhere after Production or before Reception, and is typically its own section, certainly separate from Plot . from This has also bled into some NPOV-violating editing and three removals / revisions of my own attempts to try and bring a neutral, referenced tone to the section ( and several other revisions and reverts to other editors as well ).